24/7 Live Support
Detectors And Sensıng Products
Product Types
Xtralis VESDA-E
Air sampling smoke detectors continuously measure the air quality of a room to detect early signs of combustion, even before smoke appears. Fike offers a comprehensive range of early warning detection systems and unique application-specific technical solutions for every air sampling need. (Datasheets in the Air Sampling Smoke Detectors folder will appear under the relevant products).
VESDA-E-VEP
Function
Mainstream aspirating smoke detector
Benefit
Combines advanced air sampling detection technology with flexibility for use in a wide range of applications.
Approvals
UL | ULC | FM | VdS | CE | CSFM | NF-SSI | VNIPO | ActivFire | CCC | EN
VESDA-E-VES
Function
Sector addressable aspirating smoke detector
Benefit
Monitors smoke density by individual pipe, allowing a single zone to be divided into four sectors where pinpoint location is essential.
Approvals
UL | ULC | VdS | CE | CSFM | ActivFire | EN 54-20 | ISO 7240-20
VESDA-E-VEU
Function
Highest sensitivity aspirating smoke detector
Benefit
Offers an ultra-wide sensitivity range, long linear piperuns and more sampling holes, ideal for high airflow or high-ceiling environments.
Approvals
UL | ULC | FM | VdS | CE | CSFM | NF-SSI VNIPO | ActivFire | CCC | EN 54-20 | ISO 240-20
VESDA-E-VLI
Function
Industrial aspirating smoke detector
Benefit
Designed to protect industrial applications and harsh environments with a fail-safe intelligent filter and advanced clean-air barrier.
Approvals
UL | ULC | FM | CE | ActivFire | UKCA | LPCB | NF | SIL 2 | EN54-20
VESDA-E-VEA
Function
Centralized aspirating smoke detector
Benefit
Includes the performance of smoke detectors with centralized testing and maintenance; ideal for hospitals, hotels and other highly populated buildings.
Approvals
UL | ULC | FM | VdS | CE | CSFM | EN 54-20 | ISO 7240-20 | ActivFire
The ability to quickly detect and evacuate harmful gases for many industries or facilitate building management functions is critical. The integration of gas detection into the Fike fire detection system provides a comprehensive solution that will protect your facility from a wide range of unique hazards.
Sensepoint XCD
Function
Industrial gas detector
Benefit
Monitors flammable and toxic gas hazards in industrial and commercial environments; comes pre-configured and offers simple installation on surfaces and horizontal or vertical pipes.
Approvals
EN/UL/IEC 61010-1 | CE | UL2075
Sensepoint XCL Large Bore
Function
Aspirating gas detector
Benefit
Used in tandem with an Xtralis aspirating smoke detection pipe network to identify early warning signs of both harmful or explosive gasses and fire hazards.
Approvals
CE | ETL | EN/UL/IEC 61010-1 | CE | UL2075
Sensepoint XCL Micro Bore
Function
Aspirating gas detector
Benefit
Used in tandem with an VESDA-E VEA aspirating smoke detection pipe network to identify early warning signs of both harmful or explosive gasses and fire hazards.
Approvals
CE | EN | UL | EN/UL/IEC 61010-1 | CE | UL2075
Li-ion Tamer Gas Detection
Function
Energy storage system gas detector
Benefit
Monitors battery energy storage systems for off- gas of a malfunctioning lithium ion battery; connects with BMS or fire panel to shut down power.
Approvals
CE | ETL | ETL listed to UL 61010 | EN 61326 | RoHs 3 EU 2015/863
Fike optical flame detectors enable ultra-fast detection of hydrocarbon and hydrogen fires. Their resistance to weather conditions and false alarms, along with their ability to detect smoke and oil vapor with Fike Video Analytics, makes UV/IR optical detection ideal for high-risk environments.
It quickly identifies hydrocarbon fuel and gas fires. It operates under all types of weather and light conditions. Triple spectrum technology provides immunity against false alarms.
FIK-IR3
Function
Hydrocarbon flame detector
Benefit
Detection within 40 milliseconds of fireballs or explosions; detects standard fires 50 ft away within 1.3 seconds, and fires 230 ft away within 3.7 seconds.
Approvals
ATEX | IECEx | FM | FMC | CSFM | INMETRO
FIK-IR3-H2
Function
Hydrogen flame detector
Benefit
Detection within 40 milliseconds of fireballs or explosions; detects hydrogen fires 0-66 ft away within 1.2 seconds, and fires 67-100 ft away within 4 seconds.
Approvals
ATEX | IECEx | FM | FMC | CSFM | INMETRO
FIK-UV-IR
Function
Hydrocarbon and hydrogen flame detector
Benefit
Ultra fast detection within 5 milliseconds of fireballs or explosions; detects fires up to 100 ft away for a 1ft n-heptane fire.
Approvals
ATEX | IECEx | FM | FMC | CSFM | INMETRO
FIK-HD
Function
Optional HD camera
Benefit
Provides live video feed and recording one minute pre-event and three minutes post-event. Fike Video Analytics may also be integrated for oil mist and smoke detection.
Approvals
ATEX | IECEx | FM | FMC | CSFM
Fike Fire Watch
Function
Deployable fire watch unit
Benefit
Equipped with one or two Fike flame detectors, satisfies temporary or long-term fire watch needs after hot work or if a fire protection system is disabled.
Approvals
FM-review
Fiber Optic Linear Heat Detector
Fiber Optic Linear Heat Detector transmits laser light pulses and analyzes the return signal, measuring temperatures in real-time along the length of the fiber optic cable. Distributed temperature sensing (DTS) allows for a quick response in the early stages of a fire in cable lines up to 9.6 km long and enables precise location detection.
- It is used to quickly detect vehicle fires in traffic/railway tunnels or to identify the early stages of an electrical fire in hard-to-reach electrical cable tunnels.
- It provides real-time temperature monitoring for the implementation of a preventive system (not just reactive) that can predict critical conditions on conveyor belts and generate pre-alarms for abnormal temperature conditions.
- It is directed along lithium-ion battery racks to identify the early stages of thermal runaway. When specific temperature thresholds are met, the connected Fike fire panel can initiate the BMS system to cut off power to the overheated battery system.
- In large, dusty environments where air sampling may be difficult, flexible fiber optic linear heat cables can be strategically routed to detect the early stages of fire caused by electrical short circuits, overheated or faulty equipment, and many other sources.
Lineat Heat Cable
Increased heat melts the reactive polymer covering the two steel conductors, allowing the detector module to sense the early stages of the fire. When the two conductors come into contact, an electrical short circuit occurs, and the connected PIM 530 module transmits the information to the fire panel.
For more detailed information:
Fike Video Analytics IP (FVA‐IP) Camera
FVA IP camera combines the advanced resolution and image clarity of a standard analog/network camera with built-in fire, smoke, and motion detection features. The camera’s proprietary built-in analytics is used to continuously monitor the video frame by frame, pixel by pixel, to detect fire, smoke, and motion characteristic anomalies. The camera’s video processing algorithms include:
Blazing Fire – Looks for a bright core of flame and a specific fire pattern.
Smoke Columns – Identifies anomalies caused by smoke and analyzes the progression over a period of time to identify the growing smoke cloud.
Ambient Smoke – Monitors light sources and light scattering from bright objects in video images to detect patterns consistent with the slow accumulation of smoke.
Intrusion Detection – Can monitor multiple areas of the video image to detect moving objects at different times. This can be used to detect and record wanted or unwanted individual.
Unlike traditional spot smoke detectors or heat sensors that require the transmission and accumulation of smoke or heat to trigger an alarm, the FVAIP camera uses video image analysis to monitor the fire condition throughout the area monitored by the camera. It does not rely on the transmission of smoke or heat to activate the alarm. This key difference results in faster detection of smoke and fire. In the event of a fire or smoke, the camera sends an alert signal to a monitoring computer running Fike Video Management Software (VMS) via built-in contact closures and digitally transmitted transmissions over IP.
Communication
Stay in Touch
Atlas Teknik Inc.
Atatürk Mahallesi Ataşehir Bulvarı No:5 Gardenya Plaza 5 Kat:5
+90 (216) 651 5137
info@atlasteknik.com
Copyright © Atlas Teknik 2023